LCA-2 Liquid Coffee Ambient Dispenser, Scholle 1910LX Connector, 45:1-100:1

View Larger Image in new window

Retail Price	$3,606.00
You Save	$1,821.03
Today's Price	$1,784.97
Quantity
Add to cart to get shipping estimate. You can remove this item later if you'd like

Manufacturer	Bunn-O-Matic
Model #	021-344000001
Priced Per	Each
Shipping Weight	83.00 pounds
Availability	Manufacturer Ships Direct
View Spec Sheet	021-344000001.pdf
Ask a question about this product?

	LCA-2 Liquid Coffee Ambient Dispenser

Model: 344000001

Features:

Photo May Include Optional Accessories!

THIS PRODUCT TYPICALLY SHIPS
WITHIN 5 - 10 Days

Attractive appearance and narrow 12" (30.5 cm) width.

Dispense over 125 - 5 oz. (148 ml) cups per hour with a 120 volt, 15 amp electrical connection.
Uses 1/2 gallon (1.9 liters) and most 1 gallon (3.8 liters) bag-in-box (BIB) containers.
Insulated product cabinet assures maximum product life.
Refill or rinse LED lights alert the operator for concentrate or cleaning.
FlavorGard technology continuously monitors extract-to-water ratio and assures flavor consistency.
Easy-to-program one touch portion control model available.
Sanitation listed by ETL to NSF Standard 18 and safety listed by ETL to UL Standard (UL 197) and CSA Standard (C22.2 No. 109 - model LCR-2C)

Dimensions: 30” H x 12.2” W x 24.9” D

Features, Options & Specifications Subject to Change Without Notice.

Dimensions & Specifications

Model

Product #

Volts

Amps

Watts

Dispense Rate / Sec.

Capacity
cups / hr.

Cu.
Ft.

Cord
Attached

Shipping
Weight

Product Ratio
1.8 oz.

Product Ratio
2.5 oz.

Connector
Type

LCA-2

344000001

120

14.2

1500

45:1 - 100:1

65:1 - 100:1

Scholle 1910LX

125*

9.8

Yes***

%weight|021-344000001% lbs

*Unit shipped with dispense rate set at 1.8 oz./sec. Dispense rate increases to 2.5 oz./sec. if restrictor plug is removed.
**Capacity measured with a 5 oz. cup.
***Power cord (NEMA 5-15P) 15 Amp - 120V machine only.

Electrical: Model requires 2-wires grounded service rated 120V, single phase, 60 Hz.

Plumbing: 20-90 psi (138-621 kPa) from a 3/8" (10 mm) or larger supply line. Unit requires a 2.2 gpm line flow capacity. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to reduce pressure to 50 psi. Supplied with 3/8" (10 mm) male flare fitting.

Do you have a question or comment? (type your question here to receive an answer by email or request a phone call. During business hours we can typically respond within a few minutes.)
Question/Comment
Name
Phone
Email
Text You See Below	Phonetic spelling (mp3)