Freezer Merchandiser, 1 Section/Glass Door, 4 Shelves, -10F, 23 cu ft

MODEL GDM23F

• Oversized and balanced, environmentally friendly R404A refrigeration system holds -10°F.
• White laminated vinyl exterior.
• White, vinyl coated aluminum interior with 300 series stainless steel floor (NSF approved).
• Standard interior back guard and floor rack improve airflow (excludes GDM-5F-PT and GDM-7F).
• Fluorescent interior lighting.
• Integrated door light on GDM-23F and GDM-26F models.
• Adjustable vinyl coated wire shelves.
• Positive seal, torsion type closure system, self-closing doors.
• Extruded aluminum door frames.
• Energy efficient “Low-E” thermal glass doors.
• Epoxy coated evaporator.
• Large evaporator and coil heater permit short defrost cycle.
• Defrost system time initiated, temperature terminated.
• Automatic evaporator fan motor delay during defrost cycle.
• Bottom mount compressor.
• GDM-7F standard with 2 1/2” legs, leg levelers standard for all other models shown.
• 1 year parts & labor warranty (USA).
• 5 year compressor warranty (USA).

REFRIGERATION SYSTEM:

• Refrigeration system factory balanced using CFC free R404A refrigerant.

•  Bottom mounted condensing unit - easy access for maintenance (excludes GDM-5F-PT).

• Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain -10°F interior cabinet temperature.

• Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.

CABINET CONSTRUCTION:

• Durable and permanent non-peel or chip white vinyl exterior standard. Black, rosewood and walnut available at no charge. Stainless steel available at an extra charge.

• White aluminum interior cabinet liner with 300 series stainless steel floor. Construction of liner in accordance with NSF standards.

• Safety shielded fluorescent interior lighting. Integrated door light standard on GDM-23F and GDM-26F.

• Interior rear wall airflow guard and floor rack prevent frozen product from blocking optimal airflow (excludes GDM-5F-PT, GDM-7F).

DOORS:

• Energy efficient “Low-E” thermal glass. Doors extend full width of cabinet shell. Door gaskets of one piece construction.

• Adjustable, self closing, torsion type closure system with aluminum block supports. The face of each door fitted with a 12" long handle.

• Extruded aluminum door frames.

INSULATION:

• Entire cabinet structure insulated using foamed-in-place CFC free
  polyurethane foam.

SHELVING:

• Adjustable vinyl coated wire shelves included. Shelves capable of supporting up to 250 lbs.

• Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.

LIGHTING:

• Cabinet lighting utilizes electronic ballast and T-8 bulbs for brighter illumination, longer bulb life and increased energy efficiency.

ELECTRICAL CHARACTERISTICS:

• Unit completely pre-wired at factory, and ready for final connection to appropriate outlet (see diagram below and NEMA listing next page). A cord and plug set to be included.

• A sole use circuit is required. 
   

OPTIONAL FEATURES / ACCESSORIES:
 (Up-charge and lead times may apply.)

• Novelty baskets (excludes GDM-5F-PT, -10F & 26F).

• Additional shelves.

• 2 1/2” castors for GDM-23F & -26F.

• Stainless steel or optional seismic legs for GDM-23F & GDM-26F.

• Remote cabinets and condensing units available for GDM-23F. Remote cabinets available for other models, consult factory.

CLICK IMAGE FOR LARGER VIEW