4Restaurant Equipment 4Restaurant Refrigeration 4Coffee, Tea & Espresso 4Countertop Equipment 4Tabletop 4Smallwares 4Janitorial 4Office Supply 4Restaurant Furniture 4Bar Supplies 4Pizza Supplies 4Concession Equipment 4Catering & Buffet 4Shop By Manufacturers
Restaurant Design Equipment Leasing
"T" - SERIES Reach - In Freezers
TRUE is the world’s largest manufacturer of glass door merchandisers.
IN STOCK: AVAILABLE FOR IMMEDIATE SHIPPING OR PICK-UP
TRUE - SOLID 2 DOOR REACH-IN FREEZER
MODEL T49F
STANDARD FEATURES:
REFRIGERATION SYSTEM:
Refrigeration system factory balanced using CFC free R404A refrigerant.
Bottom mounted condensing units - easy access for maintenance.
Factory pre-engineered capillary tube system with oversized condenser and evaporator to reduce product pull down time and to consistently maintain -10°F interior cabinet temperature. (non-adjustable capillary tube system superior to problematic expansion valve)
Defrost system time initiated, temperature terminated.
Automatic evaporator fan motor delay during defrost cycle.
Large evaporator and coil heater permit short defrost cycle.
Evaporator - epoxy coated at the time of manufacture to eliminate the potential of corrosion.
CABINET CONSTRUCTION:
300 series stainless steel front grill, shroud and doors. Anodized quality aluminum exterior ends and back.
NSF approved, white vinyl coated aluminum and 300 series stainless floor with coved corners.
Rear wall airflow guard prevents frozen product from blocking optimal airflow.
Barrel locks standard. Locks keyed alike. Dial exterior mounted temperature monitor.
Cabinet mounted on a welded, galvanized frame rail, painted for additional corrosion protection. Frame rail fitted with 4" diameter castors, front castors include brakes.
DOORS:
300 series stainless steel exterior with white aluminum interior to match cabinet liner. Doors extend full width of cabinet shell. Door gaskets of one piece construction.
Lifetime guaranteed adjustable torsion type closure system with aluminum block supports. The face of each door fitted with a 12" long recessed handle with sheet metal interlock. Handles are foamed-in-place to insure permanent attachment.
INSULATION:
Entire cabinet structure and doors insulated using foamed-in-place CFC free polyurethane foam.
SHELVING:
Adjustable vinyl coated wire shelves (3 per section). Shelves capable of supporting up to 250 lbs.
Full height shelf support pilasters, with double oblong holes on 1/2" centers. Pilasters made of the same material as cabinet interior. Four (4) chrome plated, stainless steel shelf clips to be included for each shelf.
LIGHTING:
Incandescent interior lighting. Light(s) activated by rocker switch mounted above door(s).
ELECTRICAL CHARACTERISTICS:
Unit completely pre-wired at factory, and ready for final connection to appropriate outlet (see diagram below and NEMA listing . A cord and plug set to be included.
A sole use circuit is required.
OPTIONAL ACCESSORIES: (At Extra Cost - Lead Time May Apply)
Available with 6" stainless steel or optional seismic legs.
Additional shelves available.
Remote condensers available for T-49F & T-72F.
T-49F available with dual right or dual left hinges - no charge.
T-72F available with three right or three left hinges - no charge.
Novelty baskets available for T-49F & 72F.
CLICK IMAGE FOR LARGER VIEW
(1) Available with full glass doors (2) Available with solid half doors † Height does not include 5" for castors or 6" for optional legs.
Specifications subject to change without notice.
View Installation Manuals for True Refrigeration Equipment