Overview:
The DR series push button and
automatic hand and hair
dryers offer exceptional construction, durability and
performance. Our best selling series comes standard
with a 10-year limited warranty.
Construction Features:
One piece
heavy duty 16 gauge steel or optional
18 gauge type 304 stainless steel (SS).
Electro statically applied white enamel. Resistant
to chipping and cleaning agents. Brushed stainless steel
finish optional.
Tamper resistant screw secures cover
to base. Air intake vents are shielded for additional safety.
Permanently lubricated, maintenance free,
brush less induction motor with automatic resetting
thermal protector. 1/10 HP, 3200 RPM.
Chrome plated zinc die castings.
360˚ revolving nozzle is standard. A fixed nozzle (F) is
optional on all models.
Push button models use a heavy duty
cam-operated timer with oversized electrical contacts
for extended life. Turns on with a light touch. Turns off
automatically.
100% solid state design eliminates
relay contact failures. Microprocessor controlled infrared
sensor turns dryer on when hands are under the air outlet.
Dryer turns off when hands are removed. Override turns
dryer off in 80 seconds if hands are not removed.
Constructed of NiChrome resistance
wire with automatic resetting thermostat. Side mounted
heating element operates in the black range for maximum life.
GENERAL INFORMATION
Dryers should be placed at least 2 feet apart and at least 12”
from
washbasin. Do not install dryer over washbasin. Automatic dryers
should be at least 18” above any projection which may interfere
with the operation of the automatic sensor.
Hand dryers require a dedicated circuit (max. 20 amp) and must
be
properly grounded. One side of dryer should be mounted to stud.
All
surface mount dryers are provided with conduit entrances for
both
between wall and surface wiring.
Average traffic washroom..............1 dryer per 2 washbasins
Heavy traffic washroom..................1 dryer per washbasin
54” Bradley sink..............................4 dryers per sink |
|
